Step 5, Connect Ductwork - Monogram ZV830 Instrucciones De Instalación

INSTALLATION—VENTED TO THE OUTSIDE
5 CONNECT DUCTWORK
• Remove shipping tape from the damper.
• Install ductwork, making connections in the
direction of airflow as illustrated.
• Push duct over the exhaust outlet and damper.
• Secure joints in ductwork with sheet metal screws.
• Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
Airflow
Duct tape
over seam
and screw
CAUTION:
Do not use sheet metal screws
at the hood flange connection. Doing so will prevent
proper damper operation. Seal connection with
tape only.
Installation Instructions
Screw
11