Chef Connect; Wi-Fi Connect - Monogram ZVW1360 Serie Manual Del Propietário

CHEF CONNECT

CHEF CONNECT OPERATION BLUETOOTH
To pair with another device:
To start the pairing process on the hood, press and hold
the CHEF CONNECT pad for 3 seconds. The backlight
for all the icons will light up until the hood is paired with
the range or other device. If the pairing is successful, the
indicator light above CHEF CONNECT will turn on and
become solid. The hood lights and fan default sync setting
will be activated.
It will time out after 2 minutes if the pairing is not
completed, after which the pairing sequence will need to
be restarted.
To cancel pairing:
To cancel the pairing, hold the CHEF CONNECT button
down for 3 seconds and then turn off the hood.

WI-FI CONNECT

CONNECTING YOUR WI-FI CONNECT ENABLED HOOD (ON SOME MODELS)
Your Monogram hood is designed to provide you with
two-way communication between your appliance and smart
device. By using the Monogram Wi-Fi Connect features,
you will be able to control essential hood operations such
as fan speed, light functions, delay off and filter notification
using your smartphone or tablet.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
What you will need
Your Monogram hood uses your existing home Wi-Fi
network to communicate between the appliance and your
smart device. In order to setup your Monogram hood, you
will need to gather some information:
1. Each Monogram hood has a connected appliance
information label that includes an Appliance Network
Name and Password. These are the two important
details that you will need to connect to the appliance.
The label is located on the side of the unit behind the
filters.
Connected Appliance Information
FCC ID: ZKJ-WCATA005
IC: 10229A-WCATA001
MAC ID: ************
Sample Label
2. Have your smart phone or tablet ready with the ability
to access the internet and download apps.
3. You will need to know the password of your home Wi-Fi
router. Have this password ready while you are setting
up your Monogram hood.
6
Network: ************
Password: **********
® CONNECTION
Default Sync Settings:
The factory default setting for the light will be the brightest.
The factory default setting for the fan sync will be OFF.
The user can change the Default Sync Settings by
pressing and holding the MED button for 3 seconds. This
will enter the Default Settings Mode. Once in this mode,
the backlights for all buttons will blink on/off indefinitely
and the fan and light will switch to the current Default Sync
Setting, so the user knows what the current default value
is. At this time, set the light and fan to the desired default
levels. Once the user is satisfied with the selection, press
and hold the POWER button for 3 seconds. This will exit
this mode. At that time the backlights will stop blinking and
the state of the fan and light will change back to their prior
state before entering the Default Settings Mode.
Connect your Monogram hood
1. On your smart phone or tablet visit
monogram.com/connect to learn more about
connected appliance features and to download the
appropriate app.
2. Follow the app onscreen instructions to connect your
Monogram hood.
3. Once the process is complete, the indicator light
located on your Monogram hood display will stay on
solid and the app will confirm you are connected.
4. If the indicator light does not turn on or is blinking,
follow the instructions on the app to reconnect. If issues
continue, please visit monogram.com/connect for
assistance regarding hood wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote
enable device installed on this hood that are not expressly
approved by the manufacturer could void the user's
authority to operate the equipment.
Enhanced Wi-Fi Features
Once your product is connected to Wi-Fi, you have access
to enhanced features via phone app.
Delay Off Timer: This feature allows the user to adjust
delay off time from 1 minute to 15 minutes. The default
delay off time is 15 minutes.
Boost Timer: This feature allows the user to adjust the
boost time from 1 minute to 15 minutes. The default boost
time is 15 minutes
Night Light Timer: This feature allows the user to set time
for the night light to turn on and off automatically.
Grease/Charcoal Filter Notifications: This feature sends
a regular reminder to the user to clean their grease filters,
and or to replace their charcoal filter, if the hood is setup in
recirculation mode.
49-2000705 Rev. 4