Hamilton Beach 70825 Manual Del Usario página 8

How to Use
Adjustable Slicing Disc
1
Place work bowl on base with handle facing forward. Adjust disc
to desired thickness by turning the adjustment post. There are 14
adjustment positions, ranging from 1/32" to 1/4" (0.8 to 6 mm) thickness.
5
Raise locking arm up and over
bowl and snap into place.
8
2
6
NOTE: Unit will not work unless the large food pusher is inserted and
the locking arm is snapped into place on the bowl.
w WARNING
Handle disc carefully; it is very sharp. Press STOP and
unplug before inserting or removing blades.
3
Carefully place disc onto motor shaft. Place lid on work bowl.
TIP: Check to make sure no other blades are in the bottom of the
work bowl.
7
Laceration Hazard:
4
For smaller, thinner foods: Put
large food pusher into place. Place
food into smaller open tube and
use small food pusher to push
in food. For larger foods: Keep
large, medium, and small pushers
together. NOTE: Unit will not
operate until large food pusher
engages the protective interlock.
Do not add food above the MAX
fill line.