Publicidad
ROTOR COMPONENTES TECNOLÓGICOS SL
Pol.Ind. Conmar. C/Miño, 14. 28864, Ajalvir, Madrid, Spain.
Phone: +34 91 884 38 46 / Fax: +34 91 884 38 65
3D+ / 3D30 CRANK COMPATIBILITY WITH FRAMES:
3D+ / 3D30 CRANK COMPATIBILITY WITH FRAMES:
This user manual is only valid for BB30,
This user manual is only valid for BB30,
PressFit30, BBright and BBright Ca road frames.
PressFit30, BBright and BBright Ca road frames.
W
W
FRAME
FRAME
1
1
68mm
68mm
68mm
68mm
2
2
42mm (BBright Ca) /
42mm (BBright Ca) /
79mm
79mm
3
3
46mm (PressFit)
46mm (PressFit)
4
4
68mm
68mm
5
5
70mm
70mm
6
6
86,5mm
86,5mm
7
7
86mm
86mm
Bottom bracket not included with cranks package.
Bottom bracket not included with cranks package.
#1. Non Drive-side Assembly Installation.
(Not included. Only needed
(Not included. Only needed
for BB30frames)
for BB30frames)
SPACER 11.5mm
SPACER 11.5mm
(Do not use it in BBright/
(Do not use it in BBright/
BBright Ca frames)
BBright Ca frames)
WASHER
WASHER
0.5mm
0.5mm
*
*
ONLY NEEDED WITH BB30 AND BBRIGHT CA FRAMES (BEARINGS
ONLY NEEDED WITH BB30 AND BBRIGHT CA FRAMES (BEARINGS
ARE PRESSED DIRECTLY INTO THE FRAME).
ARE PRESSED DIRECTLY INTO THE FRAME).
IN PRESS FIT 30 AND BBRIGHT FRAMES THE CUPS REPLACE THE
IN PRESS FIT 30 AND BBRIGHT FRAMES THE CUPS REPLACE THE
BEARING, SEAL AND CIRCLIP.
BEARING, SEAL AND CIRCLIP.
3D+/3D30 ROAD BCD 110.
INSTALLATION GUIDE.
BB30 + PressFit30 + BBright + BBright Ca FRAMES
Please note: specifications are subject to change for improvement without notice
Please note: specifications are subject to change for improvement without notice
D
D
MANUAL´S COMPATIBILITY
MANUAL´S COMPATIBILITY
42mm
42mm
Follow this user
Follow this user
46mm
46mm
manual instructions
manual instructions
BSA
BSA
(Read ROTOR BSA30 cups installation guide)
(Read ROTOR BSA30 cups installation guide)
Thread
Thread
ITA
ITA
(Read ROTOR ITA30 cups installation guide)
(Read ROTOR ITA30 cups installation guide)
Thread
Thread
(Read ROTOR PF4130 cups installation guide)
(Read ROTOR PF4130 cups installation guide)
41mm
41mm
(Read ROTOR PF4630 cups installation guide)
(Read ROTOR PF4630 cups installation guide)
46mm
46mm
CIRCLIP
CIRCLIP
*
*
BEARING, 30x42x7
BEARING, 30x42x7
(Not included)
(Not included)
*
*
SEAL, 1.6mm width (Not included)
SEAL, 1.6mm width (Not included)
Page 1
Revised: 09/2013
Revised: 09/2013
Publicidad
