Maintenance; Replace Battery; Accesories - koban KPA 02 Manual Del Usuario

operation could be affected by socket design, insulation thickness, type
and other factors.
2. When inputting voltage on the meter input terminal, due to the existence
of the induced voltage, voltage induction indicator also may light.
3. Interference sources in the external environment (such as flashlight,
motor, etc.) may trigger erroneous non-contact voltage detection.

Maintenance

Replace Battery

Warning
Before opening the meter battery cover, remove probe from the circuit to
be measured to avoid electric shock.
• When the battery indicator
immediately.
• Unscrew the fastening screw of the meter battery cover and remove it .
• Replace battery.
Note: Do not reverse the battery polarity.
Replace Probe
Warning
When replacing probe, replace with another identical probe or one with
the same capacity. The probe should be in good condition, with a capacity
of 1000V, 10A.
If the probe is damaged, such as having a bare metal wire, it should be
replaced immediately.

Accesories

Item
Probe - Level: 1000V 10A
User manual
Battery 9V
K-type temperature probe
www.grupotemper.com
Digital clamp meter
appears, the battery should be replaced
Quantity
KPA 02
1
1
1
1
Instructions manual | 35