KP 2102
Digital clamp meter
Maintenance
Replacing The Batteries
WARNING
To avoid electric shock, make
sure that the test leads have
been clearly move away from the
circuit under measurement before
opening the battery cover of the
meter.
If the sign "
" appears, it means
that the batteries should be replaced.
Loosen the fixing screw of the
battery cover and remove it.
Replace the exhausted batteries with
new ones.
Put the battery cover back and fix it
again to its origin form.
NOTE:
Do not reverse the poles of the
batteries.
Replacing Test Leads
WARNING
The replacement must be test
leads in good working condition
with the same or equivalent rating:
1000V 10A.
A test lead must be replaced if the
insulation layer has been damaged,
e.g. the wire inside is exposed.
Instructions manual |
46
Package content
Digital clamp meter
KP 2102
Test Leads: Electric
Ratings 1000V 10A
Battery, 1.5V AAA
Users manual
www.grupotemper.com
1
1 pair (set)
3
1