Functional Description; Putting Into Operation - Abicor Binzel MT 452 W Instrucciones De Servicio

MT/AUT/AUT RAB

5 Functional description

6 Putting into operation

The functioning welding torch system MIG/MAG comprises the following
components:
• Torch neck with equipment parts and parts subject to wear, Handle tube,
Hose assembly including central plug
All elements together form an operating unit which provides an arc for welding
when supplied with the appropriate operating resources. The welding wire
required for welding is fed by the welding torch system all the way to the
contact tip. The contact tip transmits the welding current to the welding wire,
producing an arc between the welding wire and work-piece. The light arc and
the molten pool are protected by the inert gas (MIG) and the active
gas (MAG).
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power supply.
• Close the gas supply.
• Close the coolant supply.
• Cut off the compressed air supply.
• Disconnect the mains plug.
DANGER
Risk of injury and machine damage when handled by
unauthorised persons
Improper repair work and modifications to the product may lead to serious
injuries and damage to the device. The product warranty will be rendered
invalid if the unit is handled by unauthorised persons.
• Operating, maintenance, cleaning and repair work may only be carried
out by qualified personnel (in Germany see TRBS 1203).
NOTICE
• Please take note of the following instructions:
 3 Product description on page EN-5
5 Functional description
EN - 9