Nice Era Star P Instrucciones Y Advertencias Para La Instalación Y El Uso página 2

Quick Guide
Era Star P
1 - Electrical connections
1
2
3
4
2 - Programming the limit switches "0" and "1"
01 02
Press until...
3 - Deletion and resetting of factory settings
A - Deletion with wall-mounted buttons which are not interlocked (or using the TTU external keypad):
01
Press together
B - Deletion with interlocked wall-mounted buttons:
01
Press 7 times
IS0079A02MM_10-04-2015
tubular motor for shutters with safety
stops and anti-intrusion springs
- ref. chapter 4
C
"0"
Automatic limit position ("0")
1
Movements (n° 1)
02
x 7 x 5
Press 5 times
Note for consultation • In this Guide,
the numbering system is independent
and does not correspond to the num-
bering stated in the text of the complete
manual. • This guide does not replace
the complete manual.
1 - Brown: = electric ascent/descent phase.
N L
2 - Black: = electric descent/ascent phase.
3 - Blue: = Common (usually connected to Neutral).
4 - Yellow-green: = Ground (protective electrical bonding).
FUSE
- ref. paragraph 6.1
03
Release Press until...
- ref. paragraph 6.2
02
Press 3 times
Release
03
5
sec.
Press until...
Cable not present on series "E Star SP" motors.
"1"
Automatic limit position ("1")
03
x 3
Release
1
Movements (n° 1) Release
THE
END
Release
THE
END
THE
END