Features; Assembly - Ryobi S630D Manual Del Operador

PRODUCT SPECIFICATIONS
Orbit Diameter .........................................................1/16 in.
Size of Paper ....................................................... 1/3 Sheet
Paper Type ................................ Non-Adhesive Sandpaper
kNOW yOUR SANDER
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
CUSHION
The cushion of the sander accepts both standard and pres-
sure sensitive adhesive sandpaper.
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACkING LIST
1/3 Sheet Sander
Sanding Sheet
Dust Bag
Vacuum Hose Adaptor
Operator's Manual

FEATURES

Adhesive Sandpaper

ASSEMBLy

7 - English
No Load Speed ...................................12,000 r/min. (RPM)
Input ................................... 120 V, 60 Hz, AC only, 2 Amps
Net Weight .................................................................. 4 lbs.
Vacuum hose adaptor ........................................... 1-1/4 in.
DUST COLLECTION
The sander has a built-in dust collection for maximum com-
fort and control, longer life, and to help keep the work area
clean. A 1-1/4 in. vacuum hose adaptor is also provided for
attaching to a vacuum cleaner.
PAPER CLAMP
The sander has two paper clamps designed to secure stan-
dard sandpaper to the platen.
SWITCH
The sander has a conveniently located sealed slide switch
to keep out dust for longer life.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.