To Do A Check Of The Muffler - Zenoah GZ4350 Manual De Usuario

5. Release the throttle trigger and make sure that the
saw chain stops and remains stationary. If the saw
chain rotates when the throttle trigger is in the idle
position, contact your servicing dealer.
To do a check of the chain catcher
1. Do a visible check and make sure that there is no
damage on the chain catcher.
2. Make sure that the chain catcher is firmly attached to
the body of the chainsaw.
To do a check of the right hand guard
• Do a check of the right hand guard to make sure that
it is not damaged and that there are no visible
defects, such as cracks.
To do a check of the vibration damping
system
1. Do a check of the vibration damping units to make
sure that there are no cracks or deformation.
2. Make sure that the vibration damping units are
securely attached to the engine unit and handle unit.
To do a check of the start/stop switch
1. Start the engine.
28
2. Press the start/stop switch downwards to the STOP
position. Make sure that the engine stops when you
do this.
WARNING: The start/stop switch
automatically returns to run position. In order
to prevent unintentional starting, the spark
plug cap must be removed from the spark
plug when assembling, checking and/or
performing maintenance.

To do a check of the muffler

1. Make sure that the muffler is not damaged.
WARNING: Never use a product that
has a faulty muffler or a muffler that is in
poor condition.
320 - 007 - 06.12.2017