Citizen CH-617 Manual De Instrucciones página 20

on the display and then the air pressure will automatically
pump up to 195 mmHg. If blood pressure tends to be on the
high level, the air pressure will automatically increase to the
required level for measurement.
*Note!
Do not inflate the cuff until it is wrapped around your wrist.
* Do not move or talk in the midst of taking blood pressure
measurement.
d. After the air pressure is increased, it will slowly decrease.
When the pulse is detected,
*Note!
• If the cuff does not stop inflating, remove the cuff at once.
• To interrupt the measurement, you may press the
The cuff will deflate immediately after a button is pressed.
e. After taking blood pressure measurement, the Systolic blood
pressure, Diastolic blood pressure and pulse will be on the
display for 1 minute.
D. Storing, recalling and erasing measurement data:
a. Storing data:
After each blood pressure measurement, the Systolic blood
pressure, diastolic blood pressure, pulse and the time & date
of specific day will be automatically stored. The memory
holds the latest 99 measurement data. If more than 99
measurements, the memory will automatically clear out the
earliest data.
will start flashing.
16
button.