auna TC-386 Manual Del Usuario página 34

EN
34
Playback
1 Select the „Tape" function (6).
2 Insert a cassette.
3 Press „Play" for playback.
4 Adjust the volume (19).
5 Press Pause if you want to interrupt the playback.
6 Press „Stop/eject" if you want to stop playback.
Note: It is possible to play back one cassette after the other. If you press
„Pause" & „Play" on deck 1 and „Play" on deck 2, deck 1 will automatically
play back to deck 2 first.
Recording from Cassette (Deck 2 to Deck 1)
You can duplicate cassettes with this equipment. This is always done from
deck 1 (playback) to deck 2 (recording).
Synchronization at normal speed
• Select the „Tape" function (6).
• Insert a recorded cassette into deck 2 and an empty one into deck 1.
• First press „Pause" and then „Record" & „Play" on deck 1.
• Now press „Play" on deck 2 and press Pause on deck 1 to start
recording.
• At the end press „Pause" on deck 1 and „Stop" on deck 2.
Synchronization at High Speed
You can copy to cassettes at high speed. This saves 2/3 of the time required
for normal recording.
• Set „Dubbing" (23) to „Hi" and copy as described above.
• Sound may be distorted when copying at high speed. To prevent this,
set the volume to minimum.
• Do not adjust „Dubbing" (23) during recording as it may damage the
cassettes.