auna TC-386 Manual Del Usuario página 37

Notes:
• The recording speed is 1:1 to playback time.
• In copy mode, only MP3 files are copied.
• The unit creates an „audio" folder for encoding and an „fcopy" folder for
copying.
• The recording format is preset MP3 bit rate: 128 kbps, 44.1 kHz.
• No title is recorded during encoding.
• To stop recording, press „Record" again.
• Files are saved to USB if USB and memory card are inserted.
• Only complete titles can be copied from USB/SD. If copying is
interrupted, no title will be saved to USB or SD/MMC card.
(4) Copy MP3 file
If an MP3 CD is inserted instead of an audio CD, the device copies these
files to USB/SD when you press „Record" (3). The operation is as explained
above. When MP3 files are detected, they will be copied.
Notes:
The files are saved to USB if USB and memory card are inserted.
If you press „Record" during USB or SD playback, the current track will be
copied from USB to SD or SD to USB.
Record Encoding
• Connect a USB memory with sufficient free space.
• Select the „Phono" function (6) and then press „Record" (3) immediately.
• The LCD display (2) will show flashing „USB" and then
encoding .
• Start playback of the desired record titles.
• To stop, press „Record" (3), the display stops blinking and shows
„Phono".
during
EN
37