D-Link DCS-5222L Guía De Instalación Rápida página 6

mOUNTING THE CAmErA
usiNg THe arTiCulaTeD arm mouNT
please refer to the steps below to assist you with mounting the camera using the arm mount. We
suggest that you configure the camera before mounting.
6
Step 1:
place the arm mount where you want to position the camera and
use a pencil to mark the holes. ensure the arm mount is oriented
correctly with adequate space for the camera to be mounted and
necessary cables to be routed. the articulated arm mount can be
arranged in several positions. NOTE: the camera can be mounted
to either side of the camera shoe.
Step 2:
depending on the material of the wall or ceiling, use proper tools
to drill two holes for screws where you marked. If the wall or ceiling
is made out of concrete, drill the holes first and insert the plastic
anchors.
Step 3:
Route any required cabling in the cable channel of the arm mount,
and place the arm mount over the plastic anchors.
Step 4:
screw the arm mount on to the wall. lightly pull on the mount to
make sure that it is a firm fix.
Step 5:
align the camera base mounting guides with the camera shoe and
threaded bolt on the arm mount. tighten the bolt to secure the
camera into position.
DCs-5222l