Mounting The Camera - D-Link DCS-5222L Guía De Instalación Rápida

mOUNTING THE CAmErA

usiNg THe PlaTe/flusH mouNT
please refer to the steps below to assist you with mounting the camera using the plate mount. We
suggest that you configure the camera before mounting.
DCs-5222l
Step 1:
place the mounting base where you want to position the camera and
use a pencil to mark the holes. ensure the mounting base is oriented
correctly and ensure there is adequate space for the camera to be
mounted and necessary cables to be routed.
Step 2:
depending on the material of the wall or ceiling, use proper tools to
drill four holes for screws where you marked. If the wall or ceiling
is made out of concrete, drill the holes first and insert the plastic
anchors.
Step 3:
place the mounting base over the plastic anchors and screw the
mounting base on to the wall. lightly pull ont the base to make sure
that it is a firm fix.
Step 4:
orient the camera mounting base guides over the mounting base
and firmly slide the camera into position until it audibly clicks into
place.
5