ITRON MZ 002-099-4115 Manual De Instrucciones página 2

Declares that the product Quantometer MZ/MTZ is designed and manufactured in conformity with the
following Directives:
1. 97/23/EG Modules B+D Category IV (pressure equipment directive),
with EC type approval certificate n°: DVGW CE-0085BM0419
The module D is supervised by
TÜV SÜD Industrie Service GmbH (CE:0036);
Dudenstrasse 28, 68167 Mannheim.
EC Certificate N°.: DGR-0036-QS-635-08, Rev. 01
2. 2004/108/EC - EMC Directive
The product fulfils the requirement of the 2004/108/EC by the fact that it meets with the following
single standards: EN 61000-6-2 (2006); EN 61000-6-3 (2007); EN 60947-5-6 (2000).
3. 94/9/EG (ATEX ) module B (Annex III ), with EC type approval certificate
N°: L.C.I.E 06 ATEX 6031 X
II 1G or II 1/2 G EEx ia IIC T5 c T6
The product meets the following standards: EN 50014 (1997) + amendments 1 and 2,
EN 50020 (2002), EN 13463-1 (2001), EN 13463-5 (2003).
The module D (Annex IV) is supervised by:
TÜV Product Service GmbH (CE:0123)
Gottlieb-Daimler-Straße 7, D-70794 Filderstadt.
EC Certificate N°: EX2 09 04 70229 001.
2
CE Declaration of Conformity
Itron GmbH
D-76161 Karlsruhe
Karlsruhe, 14.07.2009
_____________________
P. Garcia
Head of Production