AERMEC NRA 2000 Manual Tecnico página 18

7.2 COOLING AND INPUT
CAPACITIES
- "SILENCED VERSIONS"
The cooling capacity yielded and the
electrical input power in conditions
other than rated conditions are
obtained by multiplying the rated values
(Pf, Pa) by the respective correction
coefficients (Cft, Cpa).
The following diagrams allow you to
obtain the correction coefficients to
be used for the various versions of the
devices, in cold mode; next to each curve
you can see the outside air temperature
to which it refers.
KEY:
Cf = Cooling capacity correction
coefficient
Ca = Input power correction
coefficient
N.B.
- FOR THE VERSIONS Y
with temperatures below 4°C
contact company headquarters
16
Temperature of the water produced (∆t = 5°C)