Binzel Abicor BRS LCi Instructivo De Servicio página 30

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes
will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating instructions
are the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
1.2 EC Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Warning and notice signs
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
5.1 Cleaning station sub-assembly
5.2 Injection jig
5.3 Sub-assembly: wire cutting device
(DAV-externally controlled)
5.4 Optional assemblies/accessories
6 Putting into operation
6.1 BRS-LCi PLC cleaning station
6.2 Injection jig
6.3 Wire cutting device (DAV)
6.4 Securing the clamping prism
EN - 2
EN-3 6.5 Mounting the reamer
EN-3 6.6 Setting up the clamping position
EN-3 6.7 Setting up the pneumatic motor
6.8 Adjusting the proximity switch
EN-4 6.8.1 Rotary check
EN-4 6.8.2 Venturi valve (Venturi inductor)
EN-4 6.8.3 Control box
EN-4 6.9 Connecting the pneumatic system
EN-4
EN-5 7 Operation
EN-5
8 Putting out of operation
EN-5
EN-6 9 Maintenance and cleaning
EN-8 9.1 Maintenance intervals
EN-8 9.2 Replacing the DAV cutter
EN-9
10 Troubleshooting
EN-9 10.1 BRS-LCi PLC cleaning station
EN-9 10.2 Injection jig
EN-9 10.3 Wire cutting device (DAV)
EN-10 11 Disassembly
EN-10
EN-11 12 Disposal
12.1 Materials
EN-12 12.2 Consumables
EN-12 12.3 Packaging
EN-13 13 Appendix
EN-14 13.1 Circuit diagram
EN-14 13.2 PLC control system flow chart
EN-14
EN-15
BRS-LCi PLC
EN-15
EN-16
EN-17
EN-18
EN-18
EN-19
EN-20
EN-21
EN-21
EN-22
EN-22
EN-22
EN-23
EN-23
EN-23
EN-24
EN-24
EN-24
EN-25
EN-25
EN-25
EN-25
EN-26
EN-26
EN-29
BAL.0424.0• 2019-04-23