Technical Characteristics; Accessories Supplies - Gima TOBI Manual De Istrucciones

Model
Typology (MDD 93/42/EEC)
Classification UNI EN ISO 10079-2
Maximum suction aspiration (without jar)
Weight
Dimension
Working condition
Conservation condition
The filter is produced with (PTFE) hydrophobic material to prevent fluids entering the pneumatic circuit.
It should be changed immediately if it becomes wet or if there is any sign of contamination or discolouration.
If should also be changed if the unit is used with a patient whose risk of contamination is unknown.
Don't use the suction unit without the protection filter. If the suction unit is used in an emergency or in a patient where the
risk of contamination is not know the filter must be changed after each use.
WARNING: Suction tubes for insertion in the human body purchased separately from the machine should comply with ISO
10993-1 standards on material biocompatibility.

TECHNICAL CHARACTERISTICS

Room temperature:
Room humidity percentage:
Altitude:
Room temperature:
Room humidity percentage:
SYMBOLS
CE marking in conformity with EC directive 93/42/CEE and
subsequent changes
Manufacturer: GIMA S.P.A. - Via Marconi, 1 - 20060 Gessate
(MI) - Italy
Warning, consult the instruction manual
Keep in a cool, dry place
Conservation temperature: - 40 ÷ 70° C

ACCESSORIES SUPPLIES

DESCRIPTION
COMPLETE ASPIRATION JAR 400cc
CONICAL FITTING
TUBES SET 6mm x 10mm (TRASPARENT SILICON)
ANTIBACTERIAL FILTER AND HYDROPHOBIC
9
TOBI MANUALE
Medical Device Class II a
MEDIUM VACUUM / 22l/min
-40kPa (- 0.40 bar)
1.150 Kg
225 x 165 (h) x 85 mm
5 ÷ 35 °C
30 ÷ 75 % RH
0 ÷ 2000m s.l.m
- 40 ÷70 °C
10 ÷ 100% RH