GB
The manufacturer cannot be held liable for accidental or indirect damages should the device be modified,
repaired without authorization or should any of its component be damaged due to accident or misuse.
Any minimal modification / repair on the device voids the warranty and does not guarantee the compliance
with the technical requirements provided by the MDD 93/42/EEC (and subsequent changes) and its
normatives.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2012/19/UE-RAEE: The symbol on the device indicates the separated collection of electric and
electronic equipment. At the end of life of the device, don't dispose it as mixed solid municipal waste, but
dispose it referring to a specific collection centre located in your area or returring it to the distributor, when
buying a new device of the sample type to be used with the same functions. This procedure of separated
collection of electric and electronic devices is carried out forecasting a European environmental policy aiming
at safeguarding protecting and improving environment quality, as well as avoiding potential effects on human
health due to the presence of hazardous substances in such equipment or to an improper use of the same or of
parts of the same. Caution: The wrong disposal of electric and electronic equipment may involve sanctions.
The battery provided with this product shall not be treated as household waste. By ensuring these batteries are
disposed of correctly, you will help prevent potentially negative consequences for the environment and human
health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the
At the end of their life hand the batteries over to the applicable collection points for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact your local Civic Office, your
Model
Typology (MDD 93/42/EEC)
UNI EN ISO 10079-1 Classification
Power Feeding
Maximum Suction Pressure (adjustable)
Minimum Suction Pressure (adjustable)
Maximum Suction Flow
Weight
Insulation Class (when used with the SUPPORT BRACKET)
Insulation Class (when used with an Internal battery)
Size
Battery Holding Time
Battery Time Charge
Working Condition
Please note that if the device is used at an altitude higher than 2,500 m asl, the yield intended as suction flow may vary sensitively
due to the decrease in atmospheric
Use a soft dry cloth with not – abrasive and not – solvent detergents. To clean the device external parts always use a cotton cloth
dampened with detergent. Don't use abrasive or solvent detergents.
PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO
NOT GET IN TOUCH WITH LIQUIDS. NEVER CLEAN THE EQUIPMENT WITH WATER.
During all clearing operations use protection gloves and apron (if need be, also wear a face mask and glasses) to avoid getting in
contact with contaminating substances (after each utilization cycle of the machine).
DISPOSAL OF WASTE BATTERIES - (Directive 2006/66/EC)
materials will help to conserve natural resources.
household waste disposal service or the shop where you purchased the product.
TECHNICAL CHARACTERISTICS
pressure.
CLEANING DEVICE
Insulation Class II (when used with Ambulance Adapter
CE marking in conformity with EC directive 93/42/CEE and subsequent
HIGH VACUUM / HIGH FLOW
5,2 A - 14,8 V
4A - 12V
Internally Powered Equipment
Room temperature:
Room humidity percentage:
Atmospheric pressure:
Altitude:
SYMBOLS
20
SUPERVEGA EVO
Class IIa Medical device
by internal Li-Ion battery
by ambulance adapter model
-75kPa (- 0.75 bar)
-10kPa (-0.10 bar)
26 l /min
2.70 Kg
Class II
350 x 210 x 180 mm
70 minutes
360 minutes
0 ÷ 40 °C
0 ÷ 85% RH
800 ÷ 1060 hPa
0 ÷ 2000m s.l.m.
changes
SUPPORT
)