Functional Description - Milwaukee 9078-20 Manual Del Operador

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Volts Direct Current
Impacts per Minute Under Load
(IPM)
Properly Recycle Nickel Cadmium
Batteries
Underwriters Laboratories, Inc.
1. Drive shank
2. Forward/Reverse switch
3. Trigger
4. Battery pack
5. Battery pack release buttons
6. Quick change chuck (Cat. No. 9099-20)
7. Tool hanger (Cat. No. 9099-20)
8. Tool hanger ring (Cat. No. 9099-20)
Cat. No. 9099-20
7
6
SPECIFIC SAFETY RULES - CORDLESS IMPACT WRENCH

FUNCTIONAL DESCRIPTION

Cat. No. 9078-20
8
1
No Load
Catalog Volts
DC RPM
No.
18 0 - 1350
9078-20
9079-20 18 0 - 1400
0 - 1400
9099-20 18
* Output rated at full speed
Quick Change Chuck Capacities*
Catalog Quick Change
No. Auger Bits
9079-20 1-1/2"
9099-20 1-1/2"
* Only for use with the 7/16" Hex Quick
Change chuck, standard equipment on
the 9099-20, optional accessory
(Cat. No. 48-66-0061) on other models.
1
2
3
4
Specifications
Impacts
Drive Per
Minute
Shank
0 - 2150
3/4"
1/2" 0 - 2200
7/16" Hex 0 - 2200
Selfeed
Bits
2-9/16"
2-9/16"
Cat. No. 9079-20
Average
Torque
Output*
325 ft-lbs.*
240 ft-lbs.*
270 ft-lbs.*
5
page 3