Camera Settings - Abus TVAC18000B Manual De Instrucciones

8.2.1

Camera settings

Menu item
Pairing
Activation
Resolution
Quality
Description
Pairing the camera is necessary to establish a connection. The
connection stays once it has been set up. If you want to change
the camera to another channel, you need to pair it again.
In the recorder menu, select "Camera", then "Pairing a new
camera" and the required camera (1-4). The system counts
down from 60 seconds.
Press the PAIRING button briefly on the camera cable during
these 60 seconds.
The LINK LED is lit up continuously once the connection is
established.
Use the on/off switch to display or deactivate the camera.
Note that deactivated cameras are not displayed in the SMART-
QUAD view.
If you deactivate the camera, it will not make any more
recordings.
Camera on Camera off
You can choose between "Normal" and "High".
Low:
Optimised setting for mobile access, higher frame rate
High:
High resolution, lower frame rate
Select the quality of the video image.
High quality:
High quality for the view display, lower frame rate
Low quality:
Low quality for the view display, higher frame rate
19
English