Abus TVAC18000B Manual De Instrucciones página 23

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89
You can make the settings for the motion sensitivity here. The
motion sensitivity can be controlled via the PIR sensor as well
as the PIR sensor and the software motion detection at the
same time.
Motion sensitivity
Select a camera (1–4), now change to the live view with the grid
for the motion mask.
Double-click on it to deactivate a partition.
Motion area
Just click on a partition to activate it.
Right-click the mouse to exit the live view and the settings are
saved.
You can make settings for the alarm here:
Response for
recording
PIR motion detection:
Motion is detected only by the camera's PIR
sensor.
PIR detection range: up to 5 m
PIR and "Low" motion detection:
Motion is detected using the PIR and the motion
detection software.
PIR detection range: up to 5 m
Software detection range: up to 4 m
PIR and "Medium" motion detection:
Motion is detected using the PIR and the motion
detection software.
PIR detection range: up to 5 m
Software detection range: up to 5 m
PIR and "High" motion detection:
Motion is detected using the PIR and the motion
detection software.
PIR detection range: up to 5 m
Software detection range: up to 6 m
Motion detection recording duration:
Configure the recording duration for the
motion detection.
Selection: 30 / 60 / 120 seconds
For repeated motion, the recorded duration
can be increased.
Alarm sounds for motion:
Configure the duration of the alarm for motion
Selection: Off / 5 / 10 seconds
Alarm sounds for loss of video:
Configure the duration of the alarm for loss of
video
Selection: Off / 5 / 10 seconds
The alarm sounds through the loudspeaker of
the monitor/ TV via HDMI.
21
English

Publicidad

Tabla de contenido
loading

Tabla de contenido