Product Overview; Safety Warnings - D-Link DGS-8000 Serie Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Preface
This QIG will guide you through the necessary
steps for DGS-8000 series chassis-based switch
installation. Read the following safety precautions
carefully before handling the product, and to avoid
injury or damage to yourself or your equipment. If
you have any questions, please contact a D-Link
customer support representative.

Product Overview

The DGS-8000 series of Ethernet switches are
modular, high-capacity, multi-service IPv6 10G
core-routing switches. The switches provide
users with powerful security protection and the
option to expand via stacking when service
demands increase. In this way, the DGS-8000
series satisfies the needs for both security and
performance.
All of the switches in the DGS-8000 series
support dual management modules and power
supply redundancy. The series offers two
kinds of chassis - one with 10 vertical slots
(DGS-8010) and one with 6 horizontal slots
(DGS-8006).
- The DGS-8010 supports dual
management engine modules and
provides redundant backup power for
the management engine modules and 8
service module slots.
- The DGS-8006 supports dual
management engine modules and
provides redundant backup power for
the management engine modules and 4
service module slots.
2  DGS-8000 Series Chassis-Based Switch

Safety Warnings

Power Supply Safety Warning
- Make sure the product has
an earthed connection before
connecting it to the power supply.
- Ensure that all the cables are
correctly connected to the
grounding electrical sockets.
- There is more than one power
input. Ensure that all the power
cables are pulled out before you
power down the system.
Static Electricity Protection Warning
- Electrostatic Sensitive Device
(ESD) inside. Always wear an
anti-ESD ring or wrist strap
when handling the switch.
Laser Safety Warning
CLASS 1 LASER PRODUCT
- Avoid looking directly at the
optical interfaces and the
openings in the optical fibers, as
this may damage your eyes.
Serial Interface Safety Warning
- Hot-plugging into a serial interface
may damage the terminal.
Please power down the terminal
before inserting a cable in the
serial interface. Please also
power down before pulling a
cable out of the serial interface.
Fan Safety Warning
- Hazardous moving parts. Keep
your hands, clothing and body
away from the moving parts.
Transportation Safety Warning
- Weight may exceed 80 Kg.
- Don't use this handle to lift the
chassis.
Maintenance Warning
- Users are not allowed to repair
the parts within the device.
Please contact qualified
technical personnel if necessary.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dgs-8010Dgs-8006

Tabla de contenido