Troubleshooting - SentrySafe H060ES Manual Del Usuario

Troubleshooting

The Problem:
1
Display reads "E-code"
Display reads "AGAIN"
followed by "CARD"
Display reads "E-Card"
2
Display reads "LO-BAT"
when door open or closed
3
Display reads "b-LOC"
Display reads "HOLD" +
"DIGIT"
Safe will not open when
using auxiliary remote
battery pack
Why It Is Happening:
Incorrect personal code entry
Card was swiped incorrectly
from left to right -Or- Card was
swiped too fast or too slow
Not swiping the same card
originally used to open safe
Low battery
Door is not locked. Bolts are not
able to extend.
(3) repeated incorrect user
attempts
Batteries in battery pack
are insufficient
13
The Solution:
Verify personal code
and reenter
Evenly re-swipe card from
right to left
Swipe original card used
to open safe
Replace old batteries with
(4) new AA size alkalkine
batteries
Unlock the unit then
hold the door closed and
attempt to re-lock it
Wait 15 minutes and then
input correct user code or
correct stripped card
Replace old batteries with
(4) new AA size Alkaline
batteries