Product Features; Technical Data; Noise Information - Bosch GDB 180 WE Professional Manual Original

The drill stand for diamond drills can be secured to the floor
or the wall using an anchor.
The drill stand for diamond drills can be attached to the floor
by means of vacuum (accessory) or (with an additional safe-
guard) against the wall. Attaching overhead is not permitted.

Product features

The numbering of the product features refers to the repres-
entation of the power tool and drill stand on the graphic
pages.
Diamond drill
(1) On/off switch
(2) Lock-on button for on/off switch
(3) Spirit level for vertical alignment
(4) Spirit level for horizontal alignment
(5) Gear selector switch
(6) Claw coupling
(7) Drill spindle
a)
(8) Core bit
(9) Handle (insulated gripping surface)
(10) Water cutoff valve
(11) Valve adapter
(12) Water connection adapter
(13) Dust extraction adapter
a)
(14) Extraction outlet
a)
(15) Extraction hose
(16) Portable residual current device (PRCD)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Drill stand for diamond drills
(17) Star handle (insulated gripping surface)
(18) Screw on the drill holder
(19) Drill holder
(20) Drill column
(21) Upper screw of the drilling angle adjuster
(22) Levelling screw
a)
(23) Water collection ring
(24) Lower screw of the drilling angle adjuster
(25) Base plate
(26) Rack
(27) Clamping nut of the drilling angle adjuster
(28) Feed pinion
(29) Locking brake
(30) Masonry/concrete anchor
a)
(31) Quick-clamping spindle
(32) Wing nuts for quick-clamping spindle
(33) Water collection ring tension spring
(34) Sliding guides
Bosch Power Tools
a) Accessories shown or described are not included with the

Technical data

Transportable diamond drill GDB 180 WE + GCR 180
Diamond drill
Article number
Rated power input
Power output
Rated speed n₀
– First gear
– Second gear
Drilling diameter
– optimum in masonry
– possible in masonry
– optimum in concrete
– possible in concrete
Tool holder
Max. pressure of water supply
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Drill stand for diamond drills
Article number
Dimensions
– Height
– Width
– Depth
Drill holder diameter
Dimensions of core bit, max.
– Diameter
– Diameter with water collec-
– Length
Max. drill stroke.
Working length max.
Weight according to
EPTA-Procedure 01:2014
a)

Noise information

a)
Noise emission values determined according to
EN 62841‑3‑6.
a)
(35) Hex nut for sliding guides (x 10)
(36) Threaded pin for sliding guides (x 10)
product as standard. You can find the complete selection of
accessories in our accessories range.
tion ring
1 609 92A 4NJ | (24.03.2021)
English | 17
GDB 180 WE
3 601 A89 8..
W 2000
W 1340
−1
min 900
−1
min 2800
mm 40−180
mm 0−180
mm 40−150
mm 0−180
1 1/4" UNC
bar 3
kg 5.2
/I
GCR 180
3 601 A90 100
mm 767
mm 205
mm 423.5
mm 60
mm 180
mm 132
mm 530
mm 514
mm 455
kg 9.5