Sime FORCED 200 Manual Del Usaurio página 36

ASSEMBLY OF THE CHASSIS ON FLAT ROOF
CHASSIS WITH 1 OR 2 COLLECTORS
1.. Tighten.part.1.to.part.2.using.the.M8.screws.and.nuts.provided.
. Repeat.the.operation.for.the.other.coupling.
2.. Tighten.part.3.to.part.2.vertically..
3.
Tighten.diagonal.4.to.part.2.and.tighten.the.bolts.
. Repeat.steps.1,.2,.and.3.for.the.other.coupling.
4.. Place.part.6.as.indicated.in.the.figure.and.tighten.the.pins.
5. To assemble the solar collectors,.place.the.supporting.section.5.of.the.collector.to.the.lower.part..Place.
the.four.washers.(7).between.the.two.parts,.without.tightening.the.M8.pins.
. Do not use part 5 to mount a solar collector..The.solar.collector.is.fixed.using.the.two.washers.(7),.as.
described.in.figures.5a.and.5b
.
36
3
4
5
2
1
35°
6
7
5a 5b