ENGINE
23 HP* Kohler
Model
Courage, SV720
Horsepower
23 HP @ 3500 +/- 100 rpm
Displacement
44.2 cu in. (725 cc)
Electrical System
Alternator: 15A Reg.
Battery: 12 Volt, 195 CCA
Oil Capacity
54-61 oz (1,6 -1,8 L)
CHASSIS
Fuel Tank Capacity
Capacity: 3.5 gal (13,2 L)
Front Wheels
Tire Size: 15 x 6,0-6
Inflation Pressure: 12-14 psi (0,82-0,96 bar)
Rear Wheels
Tire Size: 20 x 8,0-8
Inflation Pressure: 10 psi (0,68 bar)
TRANSMISSION
K46Z
Type
Hydrostatic Tuff Torq K46Z
Engine Oil
10w 30 Premium Engine Oil
Speeds
Forward: 0-5.5 MPH (0-9,0 km/h)
@ 3400 rpm
Reverse: 0-3.0 MPH (0-4,6 km/h)
Continuous Torque
170 ft-lbs (230,5 Nm)
Output
Drawbar Rating
227 lbs (103 kg)
Maximum Weight
675 lbs (306 kg)
on Axle
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and cor-
rected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the va-
riety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power
when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of
factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), ap-
plication limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due
to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series
engine.
PARTS AND ACCESSORIES
Replacement Parts
We recommend that you see any authorized dealer for all
maintenance and service of the tractor/engine and parts.
MOWER
Width of Cut
46" (116,8 cm)
Number of Blades
3
Base Deck Platform
Side Discharge
Cutting Height
1.0-4.0 in. (2,5-10,2 cm)
Cutting Positions
Infinite
DIMENSIONS
Overall Length
71" (180,3 cm)
Overall Width
62" (116,8 cm)
Height
45" (114,3 cm)
Weight:
23 HP Tractor
w/ 46" (116,8 cm)
Mower Deck
585 lbs (262,4 kg)
Accessories
For a list of the available accessories, see an authorized
dealer.
SPECIFICATIONS
23