Timex EXPEDITION DIGITAL W-90 Guia Del Usuario página 2

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5... You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours...
Payment must be made within 30 days of purchase... Name, address,
telephone number, purchase date, and 5-digit model number required... You
can also mail a check for $5 to: Timex Extended Warranty, P...O... Box 1676,
Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/
weekday/weekend alarm, hourly chime, Chronograph with lap/split storage,
INDIGLO night-light with Night-Mode
®
BASIC OPERATIONS
SET OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to
next step)
INDIGLO
SET OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to
next step)
When setting, each button has a different function as indicated above... Watch
face will indicate when button changes function...
NOTE: On your watch the day/date display may appear below the time...
TIME/DATE/HOURLY CHIME/TIME ZONE
1... In TIME mode, press and hold SET. Time zone will flash.
2. To set, push + or – to select first or second time zone.
3... Press NEXT... Hour digits flash.
4... Press + or – to change hour including AM/PM... (Scroll through 12 hours
to get to AM/PM)...
5... Press NEXT... Minute digits flash.
6... Press + or – to change minutes...
7... Press NEXT... Second digits flash.
8... Press + or – to set seconds to zero...
9... Press NEXT... Day of week flashes.
10... Press + to – to change day...
11... Continue pattern to set month, day of month, 12-hour or 24-hour time
display, MM...DD or M... MM date format, turn hourly CHIME on/off, turn
BEEP on/off... If you select BEEP on, a beep will sound every time you
push a button (except INDIGLO
12. Press DONE to confirm and exit or NEXT to continue and set second time
zone, if desired...
Feature...
®
START/SPLIT OR +
(Increase value. Hold
to increase rapidly)
STOP/RESET OR –
(Decrease value. Hold
to decrease rapidly)
Night-Light
®
START/SPLIT OR +
(Increase value. Hold
to increase rapidly)
INDIGLO Night-Light
®
STOP/RESET OR –
(Decrease value. Hold
to decrease rapidly)
)...
®
13... When in Time mode, press and hold START/SPLIT to "peek" at second
time zone; hold for 4 seconds to switch time zones...
ALARM
Setting the ALARM is similar to setting TIME... Your watch model has three
alarms... Follow below procedure to set each alarm...
1... Press MODE repeatedly until ALM1, ALM2, or ALM3 appears... Select
alarm you want to set...
2... Press SET to set alarm...
®
3. Hour digits flash. Press + or – to change hour.
4. Press NEXT. Minute digits flash. Press + or – to change minutes.
5. Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.
6... Press NEXT... Press + or – to select DAILY, WEEKDAYS OR WEEKENDS...
7. Press DONE to confirm and exit.
8... Press Start/Split or Stop/Reset to arm or disarm alarm... When disarmed,
OFF will be displayed... When armed, the alarm clock icon
9... The INDIGLO night-light and alarm icon flashes and an alert sounds
®
when the alarm goes off... Press any button to silence... A back up alarm
will sound after five mintues if you don't press any buttons.
TIMER
1... Press MODE repeatedly until TIMER appears...
2. Press SET. Hour digits flash.
3... Follow same process as setting TIME and ALARM to set hours (up to 24
hrs...), minutes and seconds...
4... Select between REPEAT/AT END (timer counts down and then repeats)
or STOP/AT END (the timer counts down and then stops)...
5. Press DONE to confirm and exit.
6... Press START/SPLIT to start TIMER... Timer will continue to run even if you
exit Timer mode... If REPEAT/END selected
selected will flash.
H
7... An alarm melody will chime and INDIGLO
timer has reached zero or before it starts to count down again...
8... Press STOP/RESET to stop TIMER... Press again to reset to countdown
time...
CHRONO
1... Press MODE until CHRONO appears...
2... Press and hold SET...
3... The Display will read: FORMAT/SET, then LAP/SPL or SPL/LAP...
4... Press + or – to select desired format...
5. Press DONE to confirm and exit.
6... To use chrono, press START/SPLIT... Chrono continues to run even if you
exit the mode...
7... Press STOP/RESET to stop chronograph from running OR while chrono is
running, press START/SPLIT to take a split... Lap and split times will then
be displayed in the format you selected... The lap number will alternate
with the last two digits of the bottom line...
NOTES:
• Lap and split times will appear frozen for 10 seconds... Press MODE to
release the display and see running chrono...
• Press and hold STOP/RESET to reset chronograph...
INDIGLO NIGHT-LIGHT / NIGHT MODE
®
Press INDIGLO button to activate night-light... Electroluminescent technology
®
used in INDIGLO night-light illuminates entire watch face at night and in low
®
light conditions... While the night-light is on pressing any button keeps it on for
three seconds...
1
ENGLISH W90 094-095000 ENGLISH W90 094-095000
will appear...
t
will flash. If STOP/END
h
night-light flashes when the
®
FEATURE
®