Teka Combi NFE 400 Manual De Instrucciones página 10

en
Description of the Control Functions
a. Focus-Cool
The button is designed for fuzzy cooling of the
fridge. Press focus cool button to set the
function and the focus cool icon will light on.
The focus cool function will automatically take
place when there is an instantaneous change
on temperature of the fridge compartment.
The instantaneous change on the temperature
may occur during daily usage of the appliance
due loading fesh vegetables into fridge
compartment or keeping the fridge door open
for a long time in summer. The focus cool
function aims to preserve the food against
instantaneous changes on the temperature in
the fridge compartment.
To deactivate focus cool function, it is enough
to press focus cool button once more. Even
after the power shortage, the appliance will
recall focus cool function if it is not
deactivated which is sometimes advantage.
b. Freezer Set (+/-)
The desired freezer temperature of the
appliance can be adjusted by using freezer set
button. To change the freezer set temperature
press the freezer set button. The first time the
button is pressed the current set temperature
is shown on the display then afterwards, each
time the button is pressed the new freezer set
temperature will be displayed in sequence: -18,
-20, -22, -24, -18,...
The freezer set temperature will blink on the
display for 5 seconds only. Then the actual
freezer temperature will be shown.
c. Eco-Fuzzy
This button is designed to operate the
appliance in the most economical mode via
fuzzy algorithm. Press eco fuzzy button to set
the function and the Eco Fuzzy icon will light
on. The economy icon will light on when the
function takes place and the appliance will
preserve the foods inside, in the most
economical mode.
To deactivate eco fuzzy function, it is enough
to press eco fuzzy button once more. Even
after the power shortage, the appliance will
recall eco fuzzy function if it is not deactivated
which is sometimes advantage.
d. Quick
This button is designed for fast cooling of the
freezer. Press quick freeze button to start the
function. The quick freeze icon will light on
when the function is activated. Each time the
quick freeze function is activated, "-27" blinks
on the display for 5 seconds only. Then the
actual freezer temperature will be shown.
Quick freeze function lasts for maximum 3
hours. When the quick freeze function is
completed, quick freeze icon will light off
automatically and the previous fridge set
temperature will be recalled.
Quick freeze function terminates automatically
in 3 hours. To deactivate quick-freeze function
manually, it is enough to press quick freeze
button once more or freeze set button.
The electronic control system incorporates a
safety protection so that if the quick freeze
button is pressed more than once in a short
time, then the compressor will not run
immediately.
e. Actual Fridge Temperature
The average temperature of the packages
inside the fridge compartment is shown here.
Accordingly, this temperature is not sensitive
to instantaneous temperature changes.
f. Actual Freezer Temperature
The average temperature of the packages
inside the freezer compartment is shown here.
Accordingly, this temperature is not sensitive
to instantaneous temperature changes.
Also, the freezer set temperature blinks here
for 5 seconds when the freezer set
temperature is adjusted.
When quick freeze button is pressed, "-27" is
displayed also here.
4
en