In Case Of Trouble; To Protect The Lcd Screen; For Viewing Lcd Comfortably; Resetting The Microprocessor - Pioneer AVX-7600 Manual De Operación

Before You Start

In case of trouble

Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.

To protect the LCD screen

! Do not allow direct sunlight to fall on the
display when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to
the resulting high temperatures.
! When using a portable phone, keep the an-
tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.

For viewing LCD comfortably

Due to its construction, the view angle of the
LCD screen is limited. The viewing angle (verti-
cal and horizontal) can be increased, however,
by using BRIGHT to adjust the black density of
the video. When using for the first time, adjust
the black density in accordance with the view-
ing angle (vertical and horizontal) to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself
to suit your personal preference.

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
1 Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
RESET button
Note
When using with a Pioneer navigation unit, if you
press RESET, be sure ACC OFF is selected. If ACC
ON is selected, correct operation may not be pos-
sible even if you press RESET.
Section
02
5
En