Basic Operations; Turning The Unit On And Selecting A Source; Turning The Unit Off; Displaying The Navigation Image - Pioneer AVX-7600 Manual De Operación

Ocultar thumbs Ver también para AVX-7600:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19

Basic Operations

Turning the unit on and
selecting a source
1
1 Source icon
Shows which source has been selected.
% Press AV SOURCE to select a video
source.
Press AV SOURCE repeatedly to switch be-
tween the following sources:
AV-1 (video input 1)AV-2 (video input 2)
AV (video of currently selected source)
NAVI (navigation unit)
Notes
! Equipment which is connected to AV-BUS
input can be selected as AV source. You can
watch video from connected equipment
which is selected as a source by a head unit.
! In the following cases, the sound source will
not change:
 When there is no unit corresponding to the
selected source connected to this unit.
 When AV INPUT1 (video input 1) and/or
AV INPUT2 (video input 2) are not set to
VIDEO (refer to page 12).

Turning the unit off

% Press AV SOURCE and hold until the
unit turns off.
Displaying the navigation
image
You can display navigation map and naviga-
tion menu on this display.
! You can operate these functions only when
a Pioneer navigation unit is connected to
this unit.
Displaying navigation map
% Press WIDE to display navigation map.
# When the map is scrolled, pressing this but-
ton returns to the display of the map of your sur-
roundings.
Displaying navigation menu
% Press ENTERTAINMENT to display navi-
gation menu when the navigation map is
displayed.
Switching to the navigation image
% Press V.ADJ to switch the display to na-
vigation image.
# To return to the video of each source, press
V.ADJ again.
Opening and closing the
LCD panel
The LCD panel will be opened or closed auto-
matically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 13.)
! Do not close the LCD panel with hands by
force. That cause malfunction.
! The automatic close/open function will op-
erate the display as follows.
 When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
Section
04
7
En

Publicidad

Tabla de contenido
loading

Tabla de contenido