Selecting The Speaker System; About The Audio Connection; About The Video Converter - Pioneer VSX-1021-K Guía De Inicio Rápida

Bi-wiring your speakers
Your speakers can also be bi-wired if they sup-
port bi-amping.
With these connections, the Speaker System
setting makes no difference.
CAUTION
Don't connect different speakers from the
same terminal in this way.
When bi-wiring as well, heed the cautions for
bi-amping shown above.
To bi-wire a speaker, connect two
✁
speaker cords to the speaker terminal on
the receiver.

Selecting the Speaker system

The front height terminals can be used for front
wide and Speaker B connections, in addition to
for the front height speakers. Also, the surround
back terminals can be used for bi-amping and
ZONE 2 connections, in addition to for the sur-
round back speakers. Make this setting accord-
ing to the application.
Front height setup
*Default setting
1 Connect a pair of speakers to the front
height speaker terminals.
See Standard surround connection on page 8 .
2 If necessary, select 'Normal(SB/FH)'
from the Speaker System menu.
See Speaker system setting on Operating
Instructions in CD-ROM to do this.
Front wide setup
1 Connect a pair of speakers to the front
height speaker terminals.
See Standard surround connection on page 8 .
2 Select 'Normal(SB/FW)' from the
Speaker System menu.
See Speaker system setting on Operating
Instructions in CD-ROM to do this.
Speaker B setup
You can listen to stereo playback in another
room.
1 Connect a pair of speakers to the front
height speaker terminals.
See Standard surround connection on page 8 .
2 Select 'Speaker B' from the
Speaker System menu.
See Speaker system setting on Operating
Instructions in CD-ROM to do this.
Bi-Amping setup
Bi-amping connection of the front speakers for
high sound quality with 5.1-channel surround
sound.
1 Connect bi-amp compatible speakers
to the front and surround back speaker
terminals.
See Bi-amping your speakers on page 8 .
2 Select 'Front Bi-Amp' from the
Speaker System menu.
See Speaker system setting on Operating
Instructions in CD-ROM to do this.
ZONE 2 setup
With these connections you can simultaneously
enjoy 5.1-channel surround sound in the main
zone with stereo playback on another compo-
nent in ZONE 2.
1 Connect a pair of speakers to the
surround back speaker terminals.
See Standard surround connection on page 8 .
2 Select 'ZONE 2' from the
Speaker System menu.
See Speaker system setting on Operating
Instructions in CD-ROM to do this.
Connecting your equipment

About the audio connection

❚ ✻ ✼ ✞ ✆ ✌ ✝ ✽ ✄ ✟ ✠ ✞ ✆ ✄ ☎ ☛
❚ ✂ ✄ ☎ ✆ ✝ ✞ ✂ ✄ ✟ ✠ ✞ ✄ ✡ ☛ ☞ ✌
✾ ✞ ✂ ✿ ☞ ☎ ✄ ✠ ✆ ✆ ☞ ✥ ☎ ✄ ✠ ✆
❍ ✚ ✛ ✜ ❍ ✚ ✢ ✣ ✤ ✦ ✧
②
✘ ✓ ✙
✘ ✓ ✍
✖ ✗
✏ ✕
✚ ✦ ❉ ✦ ★ ✢ ✩ ✪ ✫ ✧ ✢ ✬ ✦ ✢ ✩ ✭ ✫ ✧ ❈ ✮ ✯ ❈ ★ ✦ ✧ ❈ ✢ ✩ ✤ ✦ ❉ ✦ ★ ✢ ✩ ✢ ✣ ✤ ✦ ✧
✒ ✓ ✔
✑
✎ ✏
❙ ✍
✚ ✦ ❉ ✦ ★ ✢ ✩ ✪ ✸ ✹ ★ ✦ ✺ ✢ ✩ ✭
❘ ✫ ✰ ✪ ✰ ❈ ✢ ✩ ✧ ❉ ✭
✫ ✧ ❈ ✮ ✯ ❈ ★ ✦ ✧ ❈ ✢ ✩ ✢ ❈ ✢ ✩ ✧ ❉ ✢ ✣ ✤ ✦ ✧
✪ ❲ ✱ ✲ ✳ ✴ ✵ ✶ ✴ ✷ ✭
With an HDMI cable, video and audio signals
can be transferred in high quality over a single
cable.

About the video converter

The video converter ensures that all video
sources are output through all of the MONITOR
VIDEO OUT jacks. The only exception is HDMI:
since this resolution cannot be downsampled,
you must connect your monitor/TV to the
receiver's HDMI output when connecting this
video source.
If several video components are assigned to the
same input function (see The Input Setup menu
on Operating Instructions in CD-ROM), the
converter gives priority to HDMI, component,
then composite (in that order).
02
9
En