Connecting Your Tv With No Hdmi Input; Connecting An Hdd/Dvd Recorder, Bd Recorder And Other Video Sources - Pioneer VSX-1021-K Guía De Inicio Rápida

02 Connecting your equipment

Connecting your TV with no HDMI input

This diagram shows connections of a TV (with no HDMI input) and DVD player (or other playback
component) to the receiver.
With these connections, the picture is not output to the TV even if the DVD player is connected with
an HDMI cable. Connect the DVD player's video signals using a composite or component cord.
Connect using an HDMI cable to listen to HD audio on the receiver. Do not use an HDMI cable to
input video signals.
Depending on the video component, it may not be possible to output signals connected by HDMI
and other methods simultaneously, and it may be necessary to make output settings. Please refer
to the operating instructions supplied with your component for more information.
If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio
cables (page 11).
If you use an optical digital audio cable, you'll need to tell the receiver which digital input you
connected the player to (see The Input Setup menu on Operating Instructions in CD-ROM).
12
En
Connecting an HDD/DVD recorder, BD recorder and other video
sources
This receiver has two sets of audio/video inputs and outputs suitable for connecting analog or digi-
tal video devices, including HDD/DVD recorders and BD recorders.
When you set up the receiver you'll need to tell the receiver which input you connected the recorder
to (see also The Input Setup menu on Operating Instructions in CD-ROM).
In order to record, you must connect the analog audio cables (the digital connection is for playback
only).
If your HDD/DVD recorder, BD recorder, etc., is equipped with an HDMI output terminal, we
recommend connecting it to the receiver's HDMI DVR/BDR IN terminal. When doing so, also
connect the receiver and TV by HDMI (see Connecting using HDMI on page 11 ).