Storage Instructions - Deltaplus AN801UNI Manual Del Usuario

document authorising reuse should be obtained during this audit in order to reuse the PPE. This document will clarify that the
user's safety is linked to maintaining the efficiency and resistance of the equipment.
In accordance with European regulations, the identification form must be completed prior to the first use of the product and
then updated and kept with the product as well as the manual by the user. The legibility of the product labelling should be
checked periodically.
WARNING:
The user's safety depends on the continuing efficacy of the PPE, its strength and the proper understanding of the instructions in
this manual.
It is dangerous to create your own fall arrest system as each safety function may interfere with another safety function. No
modification or addition or repair of the PPE may be made without prior written consent from the manufacturer without using
their procedures.
Do not use beyond the scope of use defined in the usage instructions, nor beyond its limits.
The manufacturer cannot be held liable for any direct or indirect accident after a modification or use other than that provided in
this manual.
When the anchor is used as part of a fall arrest system, the user must be equipped with means for limiting the maximum
dynamic forces exerted on the user during a fall arrest, to a maximum of 6 kN.
During operation, 12 kN is the maximum load transmitted by the anchoring device to the host structure.
The load directions are perpendicular to the support area for each type of structure section 160mm x 94mm maximum or
maximum diameter 94mm.
This anchoring device is not intended to deform during deployment.
Should the anchoring device be used solely for personal protective equipment against falls and not for lifting equipment.

STORAGE INSTRUCTIONS:

During transport and storage:
- keep the product in its packaging
- keep the product away from any sharp, abrasive, objects etc...
- Keep the product away from sunlight, heat, flames, hot metal, oil, petroleum products, harsh chemicals, acids, dyes, solvents,
sharp edges and structures of small diameter. These items can affect the performance of the device.
After use, store the product in its packaging in a cool, dry, ventilated area.
INSTRUCTIONS FOR CLEANING / MAINTENANCE:
The metal parts are wiped with a cloth soaked in vaseline oil. Bleach and detergents are strictly prohibited.
Do not use bleach, harsh detergents, solvents, gasoline or colouring, these substances can affect the performance of the fall
arrest device.
PERFORMANCE / COMPLIANCE:
Compliance with the essential requirements of Directive 89/686/EEC, in particular in terms of design, ergonomics and safety.
Meets with requirements and test standards EN363, EN364, EN365, EN795-A.
Strength >12 kN.
MARKING :
- Manufacturer identification: DELTAPLUS® or FROMENT®
- Date (month / year) of manufacture, e.g. 04/2014
- Product reference AN801UNI ➀
- The batch number, e.g. 14.9999
- The indication of compliance with Directive 89/686/EEC (CE symbol)
- The number of the notified body involved in the regulation of equipment (0082 or 0333)
- The number of the standard to which the product is compliant and its year: EN...
- Number "1" in figure of person ➂: indicates the maximum number of authorized users for this product.
As well as the pictograms:
Near the belay support in which AN801UNI is used, you will find a sign with information about the maximum number of users
and the type of sliding fall arrester appropriate to the belay support, dates of the last inspection and next inspection.
The legibility of the product labelling should be checked periodically.
11
DELTA PLUS GROUP
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
www.deltaplus.eu
➁ Read the instruction manual before use
AN801UNI Anchorage device - UI UPDATE : 28/07/2014