Troubleshooting - Silvercrest SDR 1500 A1 Manual De Instrucciones De Servicio Original

Warning
Do not screw the safety cap (A4) on the ap-
pliance during the decalcifying.
Do not use the steam cleaner as long as
there is decalcifying agent in the boiler.
 Completely empty the descaling solu-
tion after 8 hours. A small amount of the
solution will remain in the boiler. There-
fore, you should rinse the boiler two to
three times with cold water to remove
any residues of the descaler.
Care of the Accessories
Note: The floorcloth (F3) and the terry cloth
cover (D2) have been pre-washed and can
be used immediately for working with the
steam cleaner.
 You can wash dirty floorcloths and terry
cloth covers in the washing machine at
60°C. Do not use a liquid softener as
this would affect the ability of the cloths
to pick up dirt. You may tumble dry the
cloths.
Cleaning the device
Warning
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
 Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
20 English

Troubleshooting

Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact your SERVICE PARTNER.
Danger
Always disconnect the mains plug (A7) and
allow the steam cleaner to cool down be-
fore performing any maintenance work.
Only the authorized SERVICE PARTNER
is allowed to repair the unit.
Long heating-up time
Steam boiler is decalcified.
 Descale the steam boiler.
No steam
No water in the steam boiler.
 Turn off the appliance.
 See „Refilling Water" Page 17.
Steam lever (B4) cannot be pressed
anymore
Steam switch is secured with the lock /
child-proof lock.
 Push the steam switch lock (B3) to the
back.
Service
 UK helpline: 0844 8710705
 IE helpline: 01-4097777
info@cleanerworldgmbh.co.uk