Alerts - Breg VPULSE Manual Del Usuario

Alerts

Flashing GREEN
• The Stop/Start button will flash
when the system is initializing.
Dynamic Compression and
Sequential Compression keys
Solid RED
Dynamic Compression VIOLET
and Sequential Compression RED
14 of 22
To resolve:
• This may occur after power disruption or
after the system was improperly shut down.
To resolve:
• The SD card is not properly installed, the
card is full or faulty. Remove or reinstall
the card. If this condition persists contact
Customer Care.
• Cold Therapy is still active during this
condition.
To resolve:
• The air pump is not achieving pressure,
contact Customer Care