Connecting The Ac Adapter - Epson TM-H6000 IV-DT Manual Del Usuario

English

Connecting the AC Adapter

Follow the steps below to connect the AC adapter. See Illustration D.
!
WARNING:
Be sure to use the specified AC adapter [AC adapter,T (Model: M284A)].
Connection to an improper power source may cause fire.
!
CAUTION:
Be sure to leave a space between the AC adapter and the main unit.
1. Connect the DC cable of the AC adapter to the DC-in connector (B2)on the
product.
2. Connect the AC cable to the AC adapter.
3. Insert the AC cable plug into a power outlet.
Attaching the Connector Cover
Follow the steps below to attach the connector cover to protect the cables. See
Illustration G.
1. Put the connector cover on the feet (indicated as a in the illustration) of the main
body.
2. Push the connector cover to click onto the main body.
3. Make sure the cables are not pinched.
To remove the connector cover, push both sides of the cover inward to remove the
projections of the product (indicated as b in the illustration) from the holes in both
sides of the cover.
16 TM-H6000IV-DT User's Manual