Installing The Printer - Epson TM-T70II Manual Del Usuario

English
Important Notes on Installation
❏
For a serial interface, you must use a null modem cable, also called a cross
cable.
❏
For a parallel interface, use a cable that meets the specifications for an IEEE
1284-compliant cable.
❏
For a USB interface, install the printer driver before connecting the printer.

Installing the Printer

You can install this printer only horizontally.
Fix the printer so that it does not move around when you open the printer cover
and cut roll paper. A tape for fixing the printer is available as an option.
Install the printer with a maximum tilt of 3°. Installing the printer with a tilt of
more than 3° may cause the following problems.
• Roll paper near end cannot be detected.
• The printer cover will not close after installing roll paper.
• Roll paper cannot be taken out.
Using the Power Switch Cover
WARNING:
If an accident occurs with the power switch cover attached, unplug the AC
cable immediately. Continued use may cause fire or shock.
The enclosed power switch cover ensures that the power switch is not pressed
accidentally. To use this cover, install it as shown below.
6 TM-T70II User's Manual
(allowance:
within ±3°)