Cleaning And Maintenance; Service Centre; Environmental Information - Max 10660 Manual De Instrucciones

Cleaning and maintenance

Clean using compressed air. Always keep
grinder surfaces, switches and ventilation
slots free of dirt.
Never use corrosive or abrasive cleaning
agents, as they may attack plastic parts.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@hpschou.com

Environmental information

Electrical and electronic
equipment (EEE) contains
materials, components and
substances that may be hazardous
and harmful to human health
and the environment if waste electrical
and electronic equipment (WEEE) is not
disposed of correctly. Products marked with
the following crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that
waste electrical and electronic equipment
must not be disposed of with unsorted
household waste, but must be collected
separately.
EC Declaration of Compliance
Manufacturer: HP Schou A/S, Nordager 31,
6000 Kolding, Denmark hereby declares that
MINI GRINDER
10660
220-240 V - 135 W
has been manufactured in accordance with
the following standards:
EN60745-1:2009+A11
EN60745-2-23:2013
in accordance with the provisions of the
following directives
2006/42/EC The Machinery Directive
Kirsten Vibeke Jensen
Product Safety Manager
19.06.2018 - HP Schou A/S, Nordager 31, DK-6000
Kolding, Denmark
Manufactured in P.R.C.
6045
© 2018 HP Schou A/S
All rights reserved. The content of this manual may
not be reproduced, either in full or in part, in any way
by electronic or mechanical means, e.g. photocopying
or publication, translated or saved in an information
storage and retrieval system without written permission
from HP Schou A/S.
GB
33