System Setting - Pioneer VREC-100CH Manual De Usuario

System Setting


Button pressing tone: On and Off;
Auto power-off: Never, 1 min and 5 min;
Note: If the camera is neither operating nor with any external disturbance, it will automatically
power off after X minutes;
Clock setting: 2015/01/23 03:00:03.
Date format: None, YYMMDD, MMDDYY and DDMMYY.
Countermark: close, Date .
Note: On the lower left corner of the video recording or photograph the date, time and model will
be displayed.
TV system: PAL and NTSC.
Flicker frequency: 50 Hz and 60 Hz.
Auto screen-off: Off, 1 min and 3 min.
Note: The camera will turn off the LCD screen display after X mintues' inoperation; and the LCD
screen display can be activated by pressing any button.
Protection sensitivity: Off, Grade 0, Grade 1, Grade 2, Grade 3 and Grade 4.
Note: Locking for vibration video recording; the higher the grade, the larger the sensitivity.
Parking monitoring: Off, high, medium and low.
Note: It is mainly used for real-time monitoring when the user parks the vehicle; when the vehicle
is violently shaken or waggled the camera will automatically turn on for video recording and
locking the recording; when the video recording duration reaches the set time, the camera will save
the video and turn off.
System reset: confirmation and cancel.
17 / 22