Equipment Installation - Pioneer VREC-100CH Manual De Usuario

• Do not cover this product or get the lens dirty
• Do not place reflective objects near the lens
• Take care when handling this product so that it does not drop and you do not touch the
lens
• Recording quality may be affected if the front windshield of the vehicle is coated or
has been specially treat
• Choose a working location free from dust and debris in the air.
• When the temperature is low or there is condensation on the glass, turn on the heater
and defroster to warm up the window in order to prevent poor adhesion of the
double-sided tape

Equipment Installation


1. Please fix the vehicle power line
according to the specific inside situation
of the vehicle to avoid influencing the
driving sight.
It is better that the Car Black Box be fixed
at the front of the interior mirror to get
more comprehensive viewing angle.
2. Please do not install the device at any place
that may distract the attention or may block the sight.
3. Some vehicles still have power for the device after flameout. So please pull out the
vehicle power source before leaving the vehicle to avoid any accidents.
Power-on/Power-off

1. Power-on:
1) Automatic power-on upon the starting up of the vehicle;
2) Manual power-on by pressing the power-on/power-off button for 1 second when the blue
indicator light turns on.
2. Power off:
12 / 22