Feature Menu; Sleep Timer; Child Lock; Install. Menu - JVC AV-21KT1BPF Manual De Instrucciones

Setting Hue (In AV mode only) :
• Using “ “ or “ ” button select HUE.
• Press “ ” button to increase HUE level.
• Press “ ” button to decrease HUE level.
HUE adjust is functional only when NTSC 3.58/4.43 is ap-
plied in AV mode. It does not appear when other colour sys-
tems used.
Mode:
This option is used to change the picture size according to
the coming transmission.
• If AUTO function is selected, then the picture size will be
automatically changed according to the transmission.
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.
Every program has its own picture mode setting. When you
store the picture mode for a program other programs keep
their picture mode setting unaffected.

Feature Menu

• Press “MENU” button, now you are in main menu. In the
main menu, select FEATURE, using “
Then enter the feature menu pressing “ ” or “ ” button.
or,
• Enter the Feature Menu directly, pressing the YELLOW
button.

Sleep Timer:

• As you enter the feature menu, SLEEP TIMER will be the
first selected option.
• Use “ ” or “ ” button to change the value of the sleep timer
between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,
1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into
standby mode when the period you selected passes after
you make the selection.
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
During the last minute of the count down, the timer is dis-
played on the upper right of the screen. When the timer
reaches zero, TV goes to stand-by.

Child Lock:

In Feature Menu, press “
CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On
or Off.
When Off is selected, there will be no difference in the opera-
tion of your TV. When On is selected, the TV can only be
controlled by the remote control handset. In this case, the
front panel buttons (except the Switch On/Off button) will not
work.
Language:
Menu Language can be selected by pressing “ ” or “ ” button
on LANGUAGE item.
AV-2 Output:
You can use this feature to select the internal or external
source that will be output at AV-2 (SCART 2) terminal.
TV or AV-1 can be chosen by pressing “ ” or “ ” button on
"AV-2 OUTPUT".
“ or “ ” button.

Install. Menu

• Press “MENU” button, now you are in main menu. In the
main menu, select INSTALL. using “
then enter the Installation menu pressing “ ” or “ ” button.
or
• Enter the Installation Menu directly, pressing the BLUE but-
ton.
ENGLISH - 7 -
“ or “ ” button to select
“ or “ ” button,