Feature Menu; Installation Menu - JVC AV-29BH11EPS Manual De Instrucciones

• The Noise reduction can be adjusted in four different lev-
els: Minumum, Medium, Maximum and Auto. Addition-
ally it can be cancelled by selecting the OFF option. Press-
ing “ ” or “ ” button toggles between these five settings.
• The Picture Mode can be three different modes: Auto, 4:3
or 16:9 modes. Using “ ” or “ ” button toggle between these
different screen formats.
The Picture Mode can be stored for all channels (200 chan-
nels) individually.
• You can change the Hue for NTSC systems by “ ” or “ ”
button after selecting this item. A level indicator for Hue is
displayed while changing this item. The Hue bar is dis-
played while an NTSC signal is input from the EXT 1, EXT 2
or F AV (Front AV) terminal.
Recalling Factory settings.:
You can re-set the current PICTURE menu settings (except
Picture Mode / Tint setting) to the default settings.
• Press “STANDARD” button when no menu appears.

Feature Menu

• Press “MENU” button, now you are in main menu. In the
main menu, select FEATURE, using “
Then enter the feature menu pressing “ ” or “ ” button.
Sleep timer:
The sleep timer is used to turn the TV off after a defined peri-
od. Press “ ” or “ ” button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep timer" function turns the TV off, the remaining
time will be displayed.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press “ ” or “ ” button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
Setting External Source Output:
• You can use this menu to select the internal or external
source that will be output at EXT 2 terminal.
• In the “FEATURE” menu select “EXT2 Output” using “
or “
put at EXT 2 pressing “ ” or “ ” button (one of the sources:
TV, EXT 1 or F AV (Front AV).

Installation Menu

• Press “MENU” button, now you are in main menu. In the
main menu, select INSTALL, using “
Then enter the INSTALL menu pressing “ ” or “ ” button.
Menu Language Selection:
“ or “ ” button.
Press the “
item.
Press “ ” or “ ” button to enter “LANGUAGE” sub-menu.
Press “
guage:
• After selecting the menu language press “ ” or “ ” button to
store the selected language.
• Press MENU button to the upper menu or press STAN-
DARD button to turn the menu off.
Country Selection:
• Press the “
item.
• Press “ ” or “ ” button to enter the “COUNTRY” sub-menu.
ENGLISH - 7 -
” button. Then select the source you want to be out-
“ or “ ” button to select “LANGUAGE”
“ or “ ” button to select the desired menu lan-
“ or “ ” button to select the “COUNTRY”
“
“ or “ ” button.