Other Convenient Tape Operations; Skipping Blank Portions On The Tape; Playing The Current Tune Repeatedly; Prohibiting Tape Ejection - JVC KW-XC777 Manual De Instrucciones

Ocultar thumbs Ver también para KW-XC777:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Other convenient tape
operations

Skipping blank portions on the tape

You can skip blank portions between the tunes
(Blank Skip).
1 Press MODE repeatedly until
"B.SKIP" appears.
2 Press SEL.
Each time you press the
button, skip function mode
turns on ("B.SKIP ON") and
off ("B.SKIP OFF") alternately.
When this function is on, the B.SKIP indicator
lights up on the display and the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.

Playing the current tune repeatedly

You can play the current tune repeatedly
(Repeat Play).
1 Press MODE repeatedly until
"REPEAT" appears.
2 Press SEL.
Each time you press the
button, repeat play mode
turns on ("REPEAT ON") and
off ("REPEAT OFF")
alternately.
DOLBY B
B.SKIP
REPEAT
Canceled
DOLBY B
B.SKIP
REPEAT
Canceled
Notes:
In the following cases, Blank Skip and Repeat Play
may not operate correctly.
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– The Dolby NR setting does not match. For example,
if the tape is recorded with the Dolby C NR.

Prohibiting tape ejection

You can prohibit the tape ejection and can "lock"
a tape in the cassette compartment.
While pressing TAPE/AUX, press
and hold TAPE 0 for more than
2 seconds. "TAPE
the display for a while, and the
tape is locked and cannot be
ejected.
To cancel the prohibition and "unlock" the
tape, press and hold TAPE 0 for more than 2
seconds again, while pressing TAPE/AUX.
"EJECT OK" flashes on the display for a while,
and the tape is "unlocked."
" flashes on
17

Publicidad

Tabla de contenido
loading

Tabla de contenido