Gorenje DF 6115 E Montaje Y Modo De Empleo página 11

Ocultar thumbs Ver también para DF 6115 E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
11. Complete the installation of the discharge tube.
12. Open the extractable drawer (Fig.6) and apply the
aesthetic Q mask (if supplied) with two screws from the
inside of the hood (Fig, 7).
13. Re-install the grease filters, connect the cooker hood to
the electrical mains and check the perfect operation.
Description of the hood
Fig. 8
1
Control panel
2
Grease filter (1 or 2 depending on the model in
possession)
3
Grease filter release handle
4
Lighting
5
Vapour screen (extractable), according to the model
available, which may be in metal, glass or provided with
grease filter.
6
Aesthetic mask (Available on the basis of the model in
possession).
7
Spacer (Available on the basis of the model in
possession).
8
Wall cabinet (not supplied, the cabinet illustration is
included to explain the type of installation).
Operation
The hood is fitted with a control panel with aspiration speed
selection control and a light switch to control cooking area
lights.
Use the high suction speed in cases of concentrated kitchen
vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in
operation during cooking and for another 15 minutes
approximately after terminating cooking.
a. ON/OFF lighting
b. OFF motors
c. - d. - e. Minimum suction power (c.), medium
maximum (e.).
11
(d.),

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Df 6115 wDf 6116 eDf 6116 bxDf 6116 ax

Tabla de contenido