Emergency Stop Switch - Agilent Technologies Medalist i1000 Manual Del Operador

Emergency Stop Switch

Re-establishing Power
To reestablish ac power, turn the EMERGENCY STOP switch clockwise and
wait for the system to recover (in about 8 seconds). There is no need to
cycle power to the system. Normal operation can continue after the system
recovers.
Medalist i1000 Operator Guide
The Medalist i1000 is equipped with a red EMERGENCY STOP
switch (see Figure 1
In an emergency only, push the EMERGENCY STOP switch to release
the press or vacuum fixture.
or Figure 2).
7