Technical Specifications; Disposal Of Old Electrical Appliances - cecotec HidroBoost 2400 Home&Car Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
PROBLEM
CAUSE
Fluctuating
pressure.
The motor stops
suddenly.

7. TECHNICAL SPECIFICATIONS

Model: HidroBoost 2400 Home&Car
Reference No.: 05404
2400 W, 230-240 V~ 50 Hz
Pressure: 12 MPa - 120 bar
Max. pressure: 18 MPa - 180 bar

8. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE),
specifies that old household electrical appliances must not be disposed of with the
normal unsorted municipal waste. Old appliances must be collected separately, in order
to optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the correct
disposal of old appliances and/or their batteries.
Pump is sucking in air.
Clogged nozzle.
Valves dirty or worn.
Water seals worn.
Extension cord is too long
or wire size too small.
Thermal safety switch
has tripped due to
overheating.
Flow: 5.5 l/min - 330 l/h
Max flow: 8 l/min - 480 l/h
5 ºC - 50 ºC
Made in China | Designed in Spain
ENGLISH
SOLUTION
Check that hoses and
connections are tight.
Clean with the cleaning kit
Contact the Technical Support
Service of Cecotec.
Contact the Technical Support
Service of Cecotec.
Remove extension cord.
Check that main supply
matches the voltage stated on
the product's rating label.
IPX5
HIDROBOOST 2400 HOME&CAR
31

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido