Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support Service And Warranty - cecotec HidroBoost 1400 EasyMove Manual De Instrucciones

ENGLISH
PROBLEM
The motor stops
suddenly.

7. TECHNICAL SPECIFICATIONS

Model: HidroBoost 1400 EasyMove
Reference No.: 05401
1400 W, 220-240 V~ 50/60 Hz
Pressure: 7 MPa - 70 bar
Max. pressure: 10.5 MPa - 105 bar

8. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE),
specifies that old household electrical appliances must not be disposed of with the
normal unsorted municipal waste. Old appliances must be collected separately, in order
to optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the correct
disposal of old appliances and/or their batteries.

9. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of
purchase is submitted, the product is in perfect physical condition, and it has been given proper
use, as explained in this instruction manual.
The warranty will not cover the following situations:
• The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not authorised by the
26 HIDROBOOST 1400 EASYMOVE
CAUSE
• Extension cord is too long
or wire size too small.
• Thermal safety switch
has tripped due to
overheating.
SOLUTION
• Remove extension cord.
• Check that main supply
matches the voltage stated on
the product's rating label.
Flow: 5.5 l/min - 330 l/h
Max flow: 6.8 l/min - 408 l/h
5 ºC - 50 ºC IPX5
Made in China | Designed in Spain