Alignment Marks; Sound Signals - Chauvin Arnoux F 1N Instrucciones Para El Uso

24 RECORD: (model F3N). Symbol displayed flashing on RECORD mode, stable on
RECORD HOLD mode.
25 BUZZER: Sounds for pushbutton operation, operating mode acknowledgements, or
current overload.

ALIGNMENT MARKS

Indicate the correct position of the cable in the jaws so
that the specifications of the meter remain accurate
(see figure 3).

SOUND SIGNALS

LOW FREQUENCY
Short beep
Medium
beep
Manual mode outputs:
Long beep RANGE and RECORD
-
MIN detected
(press and hold
pushbutton)
Figure 3 : Current Clamp Alignment
MEDIUM FREQUENCY
Pushbutton function
available
MAX detected or
PEAK detected
-
36
Centreing
marks
Conductor
marks.
HIGH FREQUENCY
Pushbutton function
not available or
current overload
-
-